Aurora Labs
Get Quote
S - Titanium Pro 3D Metal

Printer Dimensions with accessories - (L x W) 600 x 700 mm Height (with powder feeders installed) 2350 mm (+350mm for servicing)

  • Weight : 170 kg
  • Size of process chamber : (X x Y x Z) 200 x 200 x 500 mm
  • Metal powder supply : 3 x 10 L
  • Electrical connection 3 Phase : 415 V 50 Hz
  • Gas : Argon Maximum 30L / min
  • Noise emission : Continuous noise pressure level 60 dB(A)
  • Maximum noise pressure level 66 dB(A)
  • Weight : 30 kg
  • Voltage : 220 V Frequency, 50 Hz Current, 1.0 – 4.5 A
  • Refrigeration capacity : 2592 kcal/h
  • Maximum flow : 13 L/min

The S - Titanium Pro is a Class 1 laser product with two embedded Class 4 lasers. Average power (each), 150 W Peak power (each), 170 W Wavelength, 10,600 nm Beam Diameter, 5 mm at 2 m Beam Divergence 0.17 degrees

Operating Environment The recommended ambient temperature range for the operating environment is 10 – 250C with a recommended ambient relative humidity range of 20 – 55%, non - condensing.

The minimum requirements for computer operating systems can be found on Mattercontrol's website (http://wiki.mattercontrol.com/Downloads) and is also summarised below: 64-bit Windows Vista or higher | OS X 10.7 and higher | Ubuntu or Mint

Stainless Steel 316, Stainless Steel 420, Inconel 625, Inconel 718, Hastelloy C-276, NiBSi, WC, Iron, Titanium - GRADE 5 and CP, Bronze, Brass, Gold, Silver, Aluminium AlSi7Mg, Aluminium AlSi10Mg, Maraging Steel